Paxar 9474 User Manual
Page 94
Width values:
Minimum
Maximum
Inches
MM
Dots
Inches
MM
Dots
0.75
19.1
144
4.25
108.0
816
Length values:
Minimum
Maximum
Inches
MM
Dots
Inches
MM
Dots
0.75
19.1
144
8.00
203.2
1536
Enter the width and length of the stock you are using. The
measurement units you use depends on the units you selected in
Printer Options. You can enter whole units and a decimal unit for
English or metric units, or a decimal unit only. Do not enter a
decimal point.
S e t t i n g t h e To p o f C h a r a c t e r
Format Entry Prompt:
Top of character towards: T
T)op or L)eft
Values:
Top
Left
This option determines the direction the characters print within
the field. You can also select the direction the field prints on the
tag. See "Setting the Top of Field" in this chapter.
Designing and Entering a Format 6-11