Panasonic KX-FP270 - Manual (Page 108)

108
Error Messages
For assistance, call 1-800-435-7329.
Reports
When your fax does not transmit, check the following items first.
– The number you dialed is correct.
– The other party’s machine is a facsimile.
If the problem remains, correct it by following the communication message printed on the sending and journal
reports (see pages 62 and 63).
Communication message
COMMUNICATION ERROR
DOCUMENT JAMMED
ERROR-NOT YOUR UNIT
MEMORY FULL
NO DOCUMENT
OTHER FAX NOT RESPOND
PRESSED THE STOP KEY
THE COVER WAS OPENED
OK
Error code
41–72
FF
—
54, 59
70
—
—
—
—
—
—
Cause & Remedy
● A transmission or reception error occurred. Try again or check
with the other party.
● The document is jammed. Remove the jammed document (p. 117).
● A transmission or reception error occurred because of a problem
with the other party’s fax machine. Check with the other party.
● The document was not received due to memory being full.
● The document was not fed into the unit properly. Reinsert the
document and try again.
● The other party’s fax machine was busy or ran out of recording
paper. Try again.
● The document was not fed properly. Reinsert the document and
try again.
● The other party’s fax machine rings too many times. To send a fax
manually, dial the number, confirm the fax tone, and press
.
● The other party’s machine is not a facsimile. Check with the other
party.
● The number you dialed is not in service.
● The button was pressed and fax communication was
canceled.
● The cover was opened. Close it and try again.
● Fax communication was successful.
STOP
START/COPY/SET