Panasonic KX-FP270 - Manual (Page 117)

H
e
lp
117
For assistance, call 1-800-435-7329.
Sending document jams
If the unit does not release the document during feeding, remove the document as follows.
Cover open
lever
1 Slide the cover open lever forward.
2 The cover is under tension to improve print quality.
Pull up hard enough to open.
3 Remove the jammed document carefully.
4 Close the cover securely by pushing down on both
ends.
If no feeding or multiple feeding occurs frequently, adjust the feeder pressure.
A C
B
Lever
Cover open
lever
1 Slide the cover open lever forward.
2 The cover is under tension to improve print quality.
Pull up hard enough to open.
3 Shift the position of the lever using an instrument
with a pointed end, like a paper clip.
Position A: When documents do not feed.
Position B: Standard position (pre-selected)
Position C: When documents multiple feed.
4 Close the cover securely by pushing down on both
ends.
Jams
Sending document does not feed, or multi-feeds
Note:
● Before opening the cover, do not pull out the
jammed paper forcibly.