Panasonic KX-FP270 - Manual (Page 62)

62
Sending Faxes
The sending report will provide you with a printed record of the fax transmission result.
One of the following choices is available.
ERROR: The sending report will print out only when fax transmission fails (pre-selected setting).
ON:
The sending report will always print out, indicating whether fax transmission is successful or not.
OFF: The sending report will not print.
START/COPY/SET
Dial keypad MENU
/
1 Press .
Display:
2 Press , then .
3 Press .
4 Press or to select the desired setting.
5 Press .
6 Press . MENU
SETUP ITEM [ ]
START/COPY/SET
MODE=ERROR ▼ ▲
START/COPY/SET
SENDING REPORT
0 4
1.SYSTEM SET UP
MENU
Sending report for confirmation
01 2345678 00'51 SND 00 COMMUNICATION ERROR (43)
Jan. 20 1998 01:19PM
Jan. 20 01:18PM
SENDING REPORT
CODE NO. USAGE TIME MODE PAGES START TIME RESULT OTHER FACSIMILE
Sample of a sending report
Communication
message
(See page 108.) Error code
(for service
personnel
use only) SND: Sent directly.
IQ-FAX: Sent to the fax
server.
Note:
● If your fax is not transmitted to the other party’s fax machine using the FaxSav network, the FaxSav network
will send a Non-Delivery Notice to your unit.