Panasonic KX-FP270 - Manual (Page 87)

87
F
a
x
/C
o
p
y
Making a copy
The unit can make single or multiple copies (up to 99). Any transmittable document (see page 60) can be
copied.
1 Open the document feeder tray.
● If the display shows “CHECK PAPER”, make
sure you pull the recording paper set lever
forward when installing paper.
2 Adjust the width of the document guides to the size
of the document.
3 Insert the document (up to 15 pages) FACE
DOWN until a single beep is heard and the unit
grabs the document.
Display:
● Make sure the handset is on the unit.
4 If necessary, press repeatedly to
select the desired setting (see the bottom of
page 54).
5 Press .
6 Enter the number of copies (up to 99).
7 If necessary, choose an enlargement/reduction
rate by pressing
( / ). See page 88.
● If you select “200%”, you cannot make multiple
copies (see the instructions on the right) or
change the resolution.
8 If you want to make collated copies, press
until the following is displayed. See
the instructions on page 88.
9 Press .
● The unit will start printing.
COPYING
START/COPY/SET
COLLATE=ON
COLLATE
ZOOM
NUMBER=1 [100%]
START/COPY/SET
RESOLUTION
STANDARD
Note:
● If a resolution is not selected, FINE resolution will
automatically be selected.
● You can make or receive a voice call while making
copies.
● After copying, the enlargement/reduction rate setting
will return to “100%”.
FACE D
OWN
Document
feeder tray
Document guides
RESOLUTION
START/COPY/SET
STOP COLLATE
( / )
ZOOM
To stop copying
Press .
To eject the document, press again.
To make multiple copies of an
enlarged document
Make a single enlarged copy by selecting
“200%” using
( ) first. Then make
multiple copies of the enlarged document.
ZOOM
STOP
STOP
Document
feeder tray
Recording
paper set
lever
BLANK
PAPER
Copying