Pioneer VSX-520 - Manual (Page 37)

The System Setup menu 05
37
En
English
Français
Español
Chapter 5:
The System Setup menu
Using the System Setup menu
The following section shows you how to make
detailed settings to specify how you’re using
the receiver. It also explains how to fine-tune
individual speaker system settings.
1 Press on the remote control,
then press the SETUP button.
2 Use
/ to select the setting you want to
adjust then press ENTER .
• SP SETUP – Specify the size, number,
distance and overall balance of the
speakers you’ve connected (see Manual
speaker setup below).
• IN ASSIG – Specify what you’ve connected
to the component video inputs (see The
Input Assign menu on page 40).
• PRE OUT – Specify how to use the PRE
OUT outputs (see The Pre Out Setting on
page 40).
Manual speaker setup
These setting optimize surround sound
performance. You only need to make these
settings once (unless you change the
placement of your current speaker system or
add new speakers).
Important
• Depending on the PRE OUT setting, there
will be differences in the speaker items
that can be adjusted.
1 Select ‘SP SETUP’ from the System Setup
menu.
2 Use / to select the setting you want to
adjust then press ENTER.
• SP SET – Specify size / number of speakers
connected (see Speaker setting below).
• X.OVER – Specify which frequencies will
be sent to the subwoofer (see Crossover
network on page 39).
• CH LEVEL – Adjust overall balance of your
speaker system (see Channel level on
page 39).
• SP DISTN – Specify the distance of your
speakers from the listening position (see
Speaker distance on page 39).
3 Press RETURN after making the
adjustments necessary for each setting.
BD DVD
INPUT SELECT
SOURCE SLEEP
TV
CONTROL
TV
INPUT
RECEIVER
RECEIVER DTV/TV ENTER
RETURN
AUDIO
PARAMETER
TUNER EDIT
TOOLS
MASTER
VOLUME
BAND
MENU
HOME
MENU
SETUP
TOP
MENU
TUNE
TUNE
P R
E S E T P R E S E T
RECEIVER
VSX-520_UCSMXCN_En.book 37 ページ ２００９年１２月１５日 火曜日 午後２時３３分