Pantech DM P100 - Manual (Page 22)

39
CH 4
CONTACTS
VOICE DIAL
Voice Dial (VR Mode) allows you to record voice tags
for entries saved in your Contact List. When a voice
tag has been recorded, you can call that contact
simply by pressing the send key and speaking the tag.
Record New Voice Dial
1. Press [MENU] .
2. When “Please say the name after pressing OK”
appears, press [OK]. You will then hear “Name
Please”.
Say the name of the voice tag and repeat the name
when prompted. When “Finished Recording” appears,
press [ASSIGN].
38
CH 4
CONTACTS
SPEED DIAL
In Idle Mode, calls can be placed to numbers stored
in Speed Dial by pressing/holding the corresponding
number key. To create a two-digit speed dial number,
press the first number, then press and hold the second
number.
1. Press [MENU] .
2. To assign a phone number to a speed dial location,
select the number location and press [ASSIGN].
3. Use the NAV KEY to select an entry, then press .
4. When the message “Speed Dial for [Name] is now
set. To access, click the number and hold for 2 sec.” is
displayed, press [OK].
NOTE:
• “1” KEY IS USED FOR THE ONE-TOUCH VOICEMAIL DIALING FEATURE.
• “UNASSIGNED” APPEARS IF THE KEY IS AVAILABLE.
FOR EXAMPLE:
SETTING A SPEED DIAL NUMBER THROUGH YOUR CONTACT LIST.
1. FROM CONTACTS, ACCESS CONTACT LIST.
2. SCROLL THROUGH CONTACT ENTRIES WITH THE NAV KEY, THEN
PRESS [OPTIONS] TO SELECT “ADD SPEED DIAL #.”
3. SCROLL THROUGH SPEED DIAL ID #S WITH THE NAV KEY, MAKE A SELECTION
THEN PRESS [OK].
4. WHEN “SPEED DIAL FOR [NAME] IS NOW SET. TO ACCESS, CLICK THE NUMBER
AND HOLD FOR 2 SEC.” APPEARS, PRESS [OK].
• If a phone number is already assigned to the key, press
[DELETE] to delete.
• To re-record a Voice Dial: Press [OPTIONS] and then
select “Re-Record.”
• To playback a Voice Dial: Press [OPTIONS] and then
select “Playback.”
3. Your Contact List will be displayed alphabetically.
Select a name, then press [OK].
When “Voice Dial for [Name] is now recorded.
To access, hold SEND key, wait for prompt and say the
name.” appears, press [OK]
You will then hear “Added.”