Pantech DM P100 - Manual (Page 57)

109
CH 4
TOOLBOX
RESET YOUR PHONE
Reset your phone restores all the factory defaults,
including ringtone types and display settings.
Contacts, Call History, Scheduler, and Messaging are
not affected.
1. Press [MENU] , then enter your
Password.
2. Press .
3. Use the NAV KEY to select “Yes or No,” then
press [OK].
108
CH 4
TOOLBOX
SPECIAL NUMBERS
Stores three phone numbers that can be called even if
your phone is in the Lock Mode.
1. Press [MENU] , then enter your
Password.
NOTE:
THE DEFAULT PASSWORD IS THE LAST 4 DIGITS OF YOUR PHONE NUMBER.
2. Press , use the NAV KEY to select a keypad
location, then press [ASSIGN].
3. Input a phone number, then press to [SAVE].
NOTE:
YOU CAN DELETE SPECIAL NUMBERS BY SELECTING THE NUMBER, PRESSING
[DELETE], AND THEN .
DELETING CONTACTS
To delete all the names and numbers on your
Contact List:
1. Press [MENU] , then enter
Password.
NOTE:
THE DEFAULT PASSWORD IS THE LAST 4 DIGITS OF YOUR PHONE NUMBER.
2. Press .
3. After “Delete all contacts?” appears, press [OK]
to delete all Contact List entries or [CAN
NOTE:
THE DEFAULT PASSWORD IS THE LAST 4 DIGITS OF YOUR PHONE NUMBER.
NOTE:
BY SELECTING YES, THE FOLLOWING MESSAGE WILL APPEAR ON YOUR DISPLAY:
"RESET PHONE THIS WILL RESET TO DEFAULT SETTINGS.” ALL THE DM-P100
SETTINGS WILL REVERT TO THE FACTORY DEFAULTS.
CEL] to exit.