Epson GT-30000 - Manual (Page 128)

6-6 Option
R4C3820
Rev. C
A5 size OPTIONS.FM
4/9/01 Pass 0
L Proof Sign-off:
KOW S.Koide C.Fujiwara
J.Miyakoshi
NOC Lee
When connecting the scanner to your PC with other IEEE
1394 devices
If other IEEE 1394 devices are already connected to your PC, connect
the scanner so that it is the last IEEE 1394 device in the chain.
Note:
❏ The IEEE 1394 cable supplied with the optional IEEE 1394 interface
board has 2 six pin connectors at each end. If IEEE 1394 devices
with four pin connectors are used in a daisy chain or tree, you will
need to use a 6:4 converter cable.
❏ Connect the cable to a vacant IEEE 1394 connector if additional
IEEE 1394 devices are to be connected to your scanner.
Installing the scanner software
After installing the interface board as described above, you need
to install the scanner software. For details on installing the scanner
software, see Chapter 3, “Installing the Software.”
PC IEEE 1394 device Scanner
PC Scanner IEEE 1394 device