Epson GT-30000 - Manual (Page 86)

4-2 Using Your Scanner
R4C3820
Rev. C
A5 size USING.FM
4/9/01 Pass 0
L Proof Sign-off:
KOW S.Koide C.Fujiwara
J.Miyakoshi
NOC Lee
Scanning Procedure
This chapter shows you how the scanner operates. The basic
procedure for scanning is as follows:
1. Turn on the scanner and PC. (Keep in mind the “Power-on
sequence” on page 2-17.) Make sure that the scanner’s READY
light is on.
2. Place a stack of documents in the Automatic Document
Feeder (See “Loading documents into your Automatic
Document Feeder” on page 4-2.), or a document on the
document table. (See “Placing a Document on the Scanner”
on page 4-4.)
3. Run the scanner software and scan. (See “Starting EPSON
TWAIN HS” on page 4-7 for details on scanning.)
Loading documents into your Automatic
Document Feeder
Note:
Make sure EPSON TWAIN HS is installed.
Before scanning a document, remember to respect the rights of
copyright owners. Do not scan published text or images without
first checking the copyright status.
The Automatic Document Feeder can automatically load up to
100 sheets. See “Document specifications” on page 4-13 for further
information.
Follow the steps below to load documents into the Automatic
Document Feeder.