Power-off sequence, Power-off sequence -19 – Epson GT-30000 User Manual
Page 39
Advertising
2
Setting up the Scanner
2-19
R4C3820
Rev. C
A5 size
SETUP.FM
4/9/01
Pass 0
R
Proof Sign-off:
KOW S.Koide C.Fujiwara
J.Miyakoshi
NOC Lee
Power-off sequence
Keep the following in mind every time you turn off your PC and
SCSI devices.
❏ When you are finished using your system, turn off your PC
first, then the scanner and other SCSI devices.
❏ While using your PC, do not turn off any SCSI device which
has a terminator that is active (on).
❏ Do not turn the scanner off and back on while using your PC,
otherwise the scanner may not work properly.
When the connection is complete, you need to install the scanner
software. See Chapter 3 of this guide.
Advertising