Epson GT-30000 - Manual (Page 62)

3-22 Installing the Software
R4C3820
Rev. C
A5 size INSTALL.FM
4/9/01 Pass 0
L Proof Sign-off:
KOW S.Koide C.Fujiwara
J.Miyakoshi
NOC Lee
Software for Scanning over a Network
To use EPSON scanners in a networked environment and send
scanned images to client PCs, you need to install the following
software:
❏ EPSON Scan Server on the PC connected to the EPSON
scanner you want to use
❏ EPSON TWAIN HS Network on network clients
Note:
To install the scanner software in Windows 2000 or NT 4.0, you need
to log on to Windows as an Administrator.
Installing EPSON Scan Server
Before installing EPSON Scan Server on the scanner server PC,
you need to do the following:
1. Connect your scanner to the scanner server PC.
2. Turn on the scanner, then the scanner server PC.
3. Insert the scanner software CD in the CD-ROM drive.
If you are using Windows NT 4.0, go to step 5.
4. Windows automatically detects the connected scanner and
starts the New Hardware Found Wizard. The New Hardware
Found Wizard automatically finds the location of the .inf file
(information file) in the CD and installs it. In this case, go to
step 6.
If it does not find the location of the .inf file, browse and select,
or type in the CD-ROM drive letter, the EPSON folder, the folder
of your preferred language, and the WINME, Win2000,
Win98, or Win95 folder as the location.