Edit file mode – Panasonic PANAFAX DF-1100 User Manual
Page 108
106
Edit File Mode
Retry an Incomplete File
If a memory communication has been unsuccessful due to a busy line or no answer, the document you stored
is automatically erased from memory after the last redial.
If you need to retain the document even if the communication failed, change the setting of Fax Parameter
No. 31 (INC. FILE SAVE) to Valid in advance. (See page 39.)
To retry the incomplete file, print a File List to check the file number (see page 99). Then, follow the steps
below.
FAX
Make sure that the FAX lamp is on.
If not, press
FAX
to set the ”FAX Mode”.
EDIT FILE
6
SET
Enter the file number or use the
B
or
Y
keys to select the
file that you want to retry.
Ex: 0 0 1
SET
Your machine will retry the file and start dialing immediately.
1. Please refer to page 101 and 102 to confirm or change the entered telephone number for the file.
2. If you set Fax Parameter No.31 to Valid, all incomplete files remain in the memory. To avoid memory
overflow, please check the memory content frequently. We recommend that optional memory be installed
when this function is used (see page 201).
3. You can also press
FUNCTION
and
9
to perform the same operation as pressing
EDIT FILE
in
step 2.
05004000002
05004020006
05004050006
02007060011
05004060050
05004060039
05004060048
05004060040
Note:
05004070010
05004070011
05004070012
JUN–12–1998 15:00
00%
EDIT FILE MODE (1–6)
ENTER NO. OR
Ɵƞ
ENTER FILE NO.OR
Ɵƞ
FILE NO.=
ENTER FILE NO.OR
Ɵƞ
FILE NO.=001
* STORE * NO.001
* DIALING * NO.001
5551234
1
2
3
4
5