Panasonic PANAFAX DF-1100 - Manual (Page 29)

27
User Parameters
Your facsimile machine has several basic settings (User Parameters) to help you keep records of the documents
you send or receive. For example, the built-in clock keeps the current date and time, and your LOGO and ID
Number help to identify you when you send or receive documents.
If a power failure occurs, a built-in battery will back up this information for up to 10 days when it is fully charged.
Setting the Date and Time
At standby the display will show the date and time. Once the standby display is set, it will automatically be
updated.
FAX
Make sure that the FAX lamp is on.
If not, press
FAX to set the ”FAX Mode”.
FUNCTION
7
1
SET
Enter the new date and time.
Ex:
0 6 Month : June
1 2 Date : 12th
1 9 9 8 Year : 1998
1 5 0 0 Time : 3:00 PM
If you make a mistake, use the A or " keys to move the
cursor to the incorrect number and enter the new number
over it.
SET
STOP
1. The clock of your machine is equipped with the D.S.T (Daylight Saving Time) system. So, your clock
will automatically set the time forward from 2:00 AM to 3:00 AM on the first Sunday of April and set the
time back from 2:00 AM to 1:00 AM on the last Sunday of October.
If your state does not use the D.S.T. system, change the Fax Parameter No. 35 (DAYLIGHT TIME) to
”Invalid” (see page 40).
2. The current Date & Time must be set because it is required by the Telephone Consumer Act of
1991. (For details, see FCC NOTICE at the end of this User’s Guide.)
02009000001
02009030001
02009020001
02009050001
02007060011
02007060012
02009060001
#@multitude
02009060002
02009060003
02007060005
#@multitude
Note:
02009070002
02009070003
JUN–12–1998 15:00
00%
SET MODE (1–6)
ENTER NO. OR
Ɵƞ
1:USER PARAMETERS?
PRESS SET TO SELECT
DATE & TIME
1–01–1998 00:00
DATE & TIME
06–12–1998 15:00
2
1
2
3
4
5
6