Panasonic PANAFAX DF-1100 - Manual (Page 61)

59
Sending Documents
START
ADF scanning
When documents are placed on the ADF, the LCD is as
shown to the right.
The document(s) is stored into memory with a file number.
Then starts to dial the telephone number.
Flatbed scanning
When a book or a document is placed on the Platen Glass,
the LCD is as shown to the right.
Press 1 to select ”YES”. (Pressing 2 returns you to the
previous screen.)
The document is stored into memory with a file number.
Then the machine prompts whether you wish to store
another page.
To store another document into memory, press 1 to select
”YES”. If you do not wish to store an additional document,
press 2 to select ”NO”. (See Note 2)
If ”YES” is selected, the LCD is as shown to the right.
Press START to store the document. Repeat this step
until you have stored all the desired documents.
If ”NO” is selected, the LCD is as shown to the right and the
machine starts to dial the telephone number.
1. You can review the stations you entered in step 4 before storing your document into memory by pressing
B
or
Y
key. Press CLEAR to clear an entered station shown on the display if needed.
2. If no action is taken within 60 seconds, the machine will delete the stored pages and return to the standby
mode.
04003000001
05004060011
04003060092
04003060093
Note:
04003070011
04003070034
#@multitude
* STORE * NO.002
PAGES=01 05%
* STORE * COMPLETED
TOTAL PAGES=05 25%
* DIALING * NO.002
5551234
SCAN FROM FLATBED?
1:YES 2:NO
* STORE * NO.002
PAGES=01 05%
SCAN ANOTHER PAGE?
1:YES 2:NO
SET ANOTHER PAGE AND
THEN PRESS START
* DIALING * NO.002
5551234
4
5
6
a
6
b
(1)
(2)