Panasonic PANAFAX DF-1100 - Manual (Page 41)

39
Customizing Your Machine
No. Parameter
Setting
Number
Setting Comments
12 COMM. JOURNAL 1 Off Selecting the home position of printout mode for COMM.
Journal Off/Always/INC
2 Always
Journal Off/Always/INC.
Off
: No printout
Always : Always prints out
*3 Inc. only
Always : Always prints out
Inc. only : Printout when communication has failed.
13 AUTO JOURNAL PRINT 1 Invalid Selecting whether the machine prints the journal
automatically after every 32 transactions.
*2 Valid
automatically after every 32 transactions.
14 FILE ACCEPTANCE
REPORT
*1 Invalid Selecting whether the machine prints the file acceptance
journal. If you set this parameter to valid, the journal will
b
i d f i i i i
2 Valid
j y , j
be printed out after entering any communications using
memory.
17 RECEIVE MODE 1 Manual Setting the reception mode to either automatic or manual.
*2 Auto
22 SUBSTITUTE RCV 1 Invalid Selecting whether the machine receives to memory when
recording paper runs out toner runs out or recording paper
*2 Valid
recording paper runs out, toner runs out or recording paper
is jammed.
24 PRINT REDUCTION
1 Fixed
Selecting print reduction mode.
Fixed: Reduce received document according to the setting
of Parameter No 25
*2 Auto
of Parameter No. 25.
Auto: Reduce received document according to the length of
received documents.
25 REDUCTION RATIO 70 70% Selecting fixed print reduction ratio from 70% to 100%. This
parameter functions only when fixed print reduction is
ĆĆĆ ĆĆĆ
parameter functions only when fixed print reduction is
selected on Fax Parameter No. 24.
100 100%
26 POLLING PASSWORD (----) Setting a 4-digit password for secured polling.
27 POLLED FILE SAVE *1 Invalid Selecting whether the machine retains the polled
document in memory even after the document is polled
2 Valid
document in memory even after the document is polled
once.
28 STAMP AT MEM. XMT 1 Invalid Selecting whether the machine stamps the original
documents when storing the documents into memory
*2 Valid
documents when storing the documents into memory.
(dependant on the Stamp setting on the Control Panel.)
31 INCOMPLETE FILE
SAVE
*1 Invalid Selecting whether the machine retains the document in
memory if the document is not successfully transmitted
SAVE
2 Valid
memory if the document is not successfully transmitted.
34 POWER SAVE TIMER
-- Start-Time
To reduce the power consumption of the machine in
standby, select the time period to turn off the high
temperature fuser unit when the printer is idle
-- End-Time
temperature fuser unit when the printer is idle.
Factory default is always ”ON” (When Start = 00:00 and
End = 00:00).
Continued on the next page.
03002000001
03002080001
#@multitude
03002080011
03002080084
03002080013
03002080060
03002080019
03002080081
03002080022
03002080023
03002080024
03002080085
03002080026
03002080087
03002990001
#@multitude
3