Panasonic PANAFAX DF-1100 - Manual (Page 109)

107
Access Code
The Access Code prevents an unauthorized user from operating the machine. Once a 4-digit Access Code is
registered, no one can operate the machine without entering the correct access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting or
transmission, and the display returns to standby, you have to re-enter the access code in order to use the
machine again. Registering the Access Code does not affect the use of the machine in any other way.
Setting the Access Code
FAX
Make sure that the FAX lamp is on.
If not, press FAX to set the ”FAX Mode”.
FUNCTION
7
4
SET
3 8
SET
Enter a 4-digit Access Code.
Ex: 1 2 3 4
SET
Select Restriction Level.
1
for All operations
or
2
for Setting and Printout of Fax Parameters only.
Ex: 2
SET
STOP
To erase the Access Code, enter the Access Code and press SET , follow the procedure above up
to step 4, and then press CLEAR , SET and STOP .
05005000001
05005030001
05005020001
02007060011
02007060012
03002060001
#@multitude
05005060001
05005060002
05005060010
05005060009
02007060005
#@multitude
Note:
05005070001
JUN–12–1998 15:00
00%
SET MODE (1–6)
ENTER NO. OR
Ɵƞ
FAX PARAMETER(01–99)
NO.=
38 ACCESS CODE
38 ACCESS CODE
1234
38 ACCESS CODE
1:ALL 1234
38 ACCESS CODE
2:FAX PARA. 1234
5
1
2
3
4
5
6
7
8