Panasonic PANAFAX DF-1100 - Manual (Page 117)

115
OMR Transmission
General Description
This feature is designed to work with a store and forward system (i.e. UF-M500 Multi-Channel Fax Gateway)
that utilize the Optical Mark Recognition (OMR) sheet to obtain routing information to automatically relay fax
messages to its final destination.
When sending a document with the OMR-XMT feature set to ”On”, the process of the following 2 operations
will be changed
•
Automatic Page Re-transmission
When the OMR-XMT feature is set to ”On” and a memory transmission failure occurs, automatic
re-transmission will start from the 1st page including the OMR sheet rather than from the failed page.
•
Automatic Page Numbering
When the OMR-XMT is set to ”On”, the automatic page numbering on the header of each page will start
from the 2nd page instead of the 1st page, which is your OMR sheet.
Table 1: Documents sent with the OMR–XMT feature set to ”On”
Transmitted Pages Received by the System
Received by the final
destination
OMR
sheet
Page 1
Page 2
OMR
sheet
Page 1
Page 2
Header P.01
Header P.02
Page 1
Page 2
Header P.01
Header P.02
Table 2: Documents sent with the OMR–XMT feature set to ”Off”
Transmitted Pages Received by the System
Received by the final
destination
OMR
sheet
Page 1
Page 2
OMR
sheet
Page 1
Page 2
Header P.02
Header P.03
Header P.01
Page 1
Page 2
Header P.02
Header P.03
05012000002
06002020001
#@multitude
05012050001
05012050002
05012080001
05012080002
5