Paxar 4 - Manual (Page 10)

Loading and Removing the Battery––––––––––––––––––––––––––––
To load a battery:
1. Turn the printer off. (|) indicates on and (O) indicates off.
2. Turn the printer so the back of the printer faces you.
3. Insert the tabs on your battery into the slots of the battery
well in the base of the printer. Push down until the latch
clicks.
n
To remove the battery, press down on the latch with your
thumb while inserting your fingers into the depression. Lift the
battery out of the well as shown.
Latch
Tab
Finger
Depression
Chapter 1. Getting Started
1-5
TC9490OH Rev. C 3/97