Paxar 4 - Manual (Page 26)

4. Feed the supplies through the upper opening in the supply
guide.
5. Close the printer and turn the printer on.
6. Wait until the LED flashes one time (about five seconds)
and then press the trigger. The printer advances the
supply to the correct position for printing.
n
The LED slowly alternates flashing amber and green to
indicate the printer is out of supplies. When this happens,
load a new roll of supplies and press the trigger to clear the
error.
Upper
Opening
Lower
Opening
Supply
Guide
Chapter 2. Loading Supplies
2-13
TC9490OH Rev. C 3/97