Paxar 4 - Manual (Page 39)

The test label displays the following information:
✦ Model number (Model:)
✦ Software version (Software:)
✦ Number of supplies printed (Stock CNT:)
✦ Communication settings (COM:)
✦ Printhead information (AVG PH RS:)
✦ Test pattern.
Turn the printer off and then back on to return to normal
printing.
For more information on troubleshooting, see your MPCL II
Programmer’s Manual.
LED Indicator ––––––––––––––––––––––––––––––––––––––––––––––
This table explains the meanings of various LED states. Use
the color of the LED and whether it is solid, blinking slowly, or
blinking rapidly to determine the meaning of the indicator.
LED States Solid Fast Blink
( 1 ⁄
4
second)
Slow Blink
(2 seconds)
GREEN Ready...
On-Demand Label Ready Low Battery
AMBER Ready...
Continuous Packet Syntax
Error Printhead
Hot...Wait
AMBER/
GREEN N/A Hardware
Error or printer
failure Imaging
Error
Your System Administrator can use Status Polling, an online
diagnostic command, to get a more specific description of the
printer error. See your MPCL II Programmer’s Manual for
information about Status Polling.
9490 Operator’s Handbook
5-2
TC9490OH Rev. C 3/97