Paxar 4 - Manual (Page 17)

6. To close the printer, push the printhead assembly toward
the printer, close the supply guide and latch the faceplate
into place.
Loading Ribbon ––––––––––––––––––––––––––––––––––––––––––––
Use ribbon when printing on thermal transfer supplies.
To load the ribbon cassette into the printer:
1. Open the printer and remove the ribbon cassette.
2. Slide a new ribbon cassette onto the printhead assembly
until it slips into place.
3. Close the printer.
Ribbon
Cassette
9490 Operator’s Handbook
2-4
TC9490OH Rev. C 3/97