Panasonic PT-D995U - Manual (Page 32)

Basic Operations (Cont.)
Projector button To display the SETTING menu
The setting menu is used to make basic adjustments and settings
(TRACKING, PHASE, H. POS., V. POS. FOCUS, ZOOM and
AUDIO-VOL.) of the video picture being projected after installation
(connection) or after inputs are switched. For operating the setting
menu, refer to “Making Basic Settings” on page 33.
Press the projector’s SETTING button.
The setting menu is displayed on the screen.
Projector
SETTING button
To display the MAIN menu
The main menu is used to adjust or set the projected video picture
and the projector’s condition, etc. (PIXEL CLOCK, POSITION,
P I C T U R E , S O U N D , O P T I O N S , S O U R C E D E C O D E R a n d
LANGUAGE). For operating the main menu, refer to pages 36 to
49.
Press the remote control’s MENU/ENTER button.
The main menu appears on the screen.
Remote control unit
Remote control unit
MENU/ENTER button
PRESET button
To change the menu language displayed
English is set when the projector is shipped from the factory. The language
displayed can be selected from the following six languages:
(Japanese), ENGLISH, DEUTSCH (German), ESPAÑOL (Spanish),
ITALIANO (Italian), and FRANÇAlS (French). However, some words such
as “QUICK ALIGNMENT” are displayed only in English. Pronouns such as
line display and source display are similarly treated.
To use the remote control’s PRESET button
The PRESET button is used for adjustments made on the main
menu or setting menu.
When resetting only the selected settings to the factory-set
values, press the remote control’s PRESET button.
Only the selected item’s setting is reset to the factory-set value.
Remote control unit
This button works only for numeric values. It does not work for switching
between ON and OFF.
For items such as PIXEL CLOCK (TRACKING and PHASE), POSITION (H.
POS. and V. POS.), SOUND (TREBLE and BASS), both settings are reset
at the same time.
32