Panasonic PT-D995U - Manual (Page 43)

Operating the Main Menu (Cont.)
Adjusting Picture Quality (Cont.)
Remote control unit
MENU/ENTER
button
Cursor buttons
PAGE BACK button
Submenu items
[PICTURE menu]
Adjustment item Button Adjustment content
BRIGHTNESS
CONTRAST
R-GAIN
G-GAIN
B-GAIN
TEXT MODE
ALL RESET
Gets darker.
(-30 0 +30)
Gets brighter.
(-30 0 +30)
Gets lower.
(-30 0 +30)
Gets higher.
(-30 0 +30)
Gets less reddish.
(-30 0 +30)
Gets more reddish.
(-30 0 +30)
Gets less greenish.
(-30 0 +30)
Gets more greenish.
(-30 0 +30)
Gets less bluish.
(-30 0 +30)
Gets more bluish.
(-30 0 +30)
Sets a mode which allows easy
text reading.
NORMAL TEXT1
TEXT2
NORMAL TEXT1
TEXT2
Resets all adjustment values of
MENU/
items on the PICTURE quality
menu to the factory-set status
ENTER (adjustment values: 0, text
mode: NORMAL).
There is a relationship between the adjustment of items R-GAIN, G-GAIN,
and B-GAIN and that of item CONTRAST. For example, when adjustment
values are : R-GAIN: 0, G-GAIN: 5, B-GAIN: 0, and CONTRAST: 0, changing
CONTRAST to 1 changes the adjustment values as follows: R-GAIN: 1, G-
GAIN: 6, and B-GAIN: 1.
Also, when the adjustment value of any of R-GAIN, G-GAIN, and B-GAIN
has reached -30 (minimum) or +30 (maximum), CONTRAST cannot be
adjusted to any higher value. For example, when R-GAIN is 0, G-GAIN is 5,
B-GAIN is 0, and CONTRAST is 0, increasing CONTRAST allows the other
adjustment values to increase until R-GAIN: 25, G-GAIN: 30, and B-GAIN:
25, then CONTRAST becomes 25 and cannot be adjusted to any higher
value.
The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
Adjustment items (on the PICTURE menu) are different when
AV signals are input and when computer-related signals are
input. To return to the main menu, press the PAGE
BACK button.To finish the main menu, press
PAGE BACK again.
To finish the menu display from the submenu display (PICTURE
menu), press PAGE BACK twice.
43