Panasonic PT-D995U - Manual (Page 56)

Specifications
Opto-mechanical system
Projection method
D-ILA device
Projecting lens
Screen size
Light-source lamp
Electrical system
Color system
Resolution
Scanning frequency
Input / output
[AV IN (AV input)]
Y/C
VIDEO
Y, P B /B-Y, P R /R-Y
AUDIO L/R (for AV IN)
3D-ILA device, 1 lens, 3 primary color optical shutter method
0.9” (approx. 2.3cm) measured diagonally (1365 x 1024 pixels) x 3 (Total number of pixels :
4,193,280)
Electric-driven zoom of 1.5 x
42” (approx. 107cm) to 300” (approx. 762cm) [recommended] to 521” (approx. 1,323cm)
[maximum] measured diagonally (*with aspect ratio : 4 : 3)
400 W xenon lamp
NTSC, NTSC4.43, PAL, SECAM (* Automatic switching / manual switching)
1365 x 1024 dots (*S-XGA full resolution, during RGB input)
1000TV lines (*Horizontal resolution, aspect ratio 4 : 3, during video input)
Horizontal frequency : 15 kHz - 82 kHz
Vertical frequency : 50 Hz - 78 Hz
1 -line, mini-DIN 4 pin x 1
Y(luminance signal) : 1Vp-p, 75 (negative sync)
C (chroma signal) : 0.286Vp-p (burst signal), 75 [NTSC]
: 0.3Vp-p (burst signal), 75 [PAL]
1-line, BNC x 1
Composite video signal : 1 Vp-p, 75 (negative sync)
1-line, BNC x 3
Component (Y,B-Y,R-Y) signals
Y : 1Vp-p, 75 (negative sync)
B-Y : 0.7Vp-p, 75
R-Y : 0.7Vp-p, 75
High-vision base band (Y,P B ,P R ) signals
Y : 1Vp-p, 75 (3-value sync)
P B : + 0.35Vp-p, 75
P R : + 0.35Vp-p, 75
1-line, RCA x 2
Audio signal : 0.5Vrms, high impedance
[COMPUTER IN (COMPUTER input)]
COMPUTER IN-1 (PC) 1-line, D-sub 3-row 15 pin x 1
Analog RGB signal
R : 0.7Vp-p, 75
B : 0.7Vp-p, 75
G : 0.7Vp-p, 75
G on Sync : 1Vp-p, 75 (negative sync)
Sync signal : 1 to 5Vp-p, high impedance (positive/negative polarity)
* Some connected devices may not correspond to composite sync (C S ) or G on sync signal.
AUDIO 1-line, stereo mini-jack x 1
(For COMPUTER IN-1) 0.5Vrms, high impedance
COMPUTER IN-2 1-line, BNC x 5
Analog RGB signal
R : 0.7Vp-p, 75
B : 0.7Vp-p, 75
G : 0.7Vp-p, 75
G on sync : 1 VP-p, 75 (negative sync)
56