Submenu items, Make adjustment with the cursor button or, Operating the main menu (cont.) – Panasonic PT-D995U User Manual

Page 42: For video system input, For computer system input

Advertising
background image

Operating the Main Menu (Cont.)

Adjusting Picture Quality (Cont.)

Remote control unit

MENU/ENTER
button

Cursor buttons

PAGE BACK button

Submenu items

[PICTURE

menu]

The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
Adjustment items (on the PICTURE menu) are different when
AV signals are input and when computer-related signals are

input.

Make adjustment with the cursor
button or .

For video system input

To adjust multiple items, repeat steps 4 and 5.

To reset all items (to factory-set adjustment values “0”), select

ALL RESET with the cursor buttons and press the MENU/

ENTER button.

To reset only the selected items (ALL RESET excluded) to

the factory-set adjustment value, press the remote control’s

PRESET button. The selected item is reset to the factory-set

adjustment value.

Adjustment item Button

Adjustment content

Gets darker.

(-30 0 +30)

Gets brighter.

(-30 0 +30)

Gets lower.

(-30 0 +30)

Gets higher.

(-30 0 +30)

Gets softer.

(0 7)

Gets sharper.

(0 7)

Gets softer.

(-30 0 +30)

Gets deeper.

(-30 0 +30)

Gets reddish.

(-30 0 +30)

Gets greenish.

(-30 0 +30)

Resets all adjustment values of
items on the PICTURE menu to

the factory-set values (0).

BRIGHTNESS

CONTRAST

SHARPNESS

COLOR

TINT

ALL RESET

MENU/

ENTER

The adjustment item, TINT, is displayed only for NTSC system. It is not
displayed (cannot be adjusted) when PAL or SECAM system signals are

input.

When video signals are input to the COMPUTER IN-2 terminal, adjustment
items “COLOR” and “TINT” are indicated but cannot be adjusted.

For computer system input

To adjust multiple items, repeat steps 4 and 5.

To reset all items (to factory-set adjustment values “0”), select

ALL RESET with the cursor buttons and press the MENU/ENTER

button.

To reset only the selected items (ALL RESET excluded) to the

factory-set adjustment value, press the remote control’s PRESET

button. The selected item is reset to the factory-set adjustment

value.

(To be continued on the next page)

42

Advertising