L 29, L 29) t, L 29) – Panasonic DIGA DMR-ES30V User Manual

Page 29: L 29, format disc), Editing

Advertising
background image

Editing

29

VQT0P03

DVD

Ed

itin

g

[RAM] [-RW‹V›] [-RW‹VR›]
≥Follow steps 1 to 3 of “DISC MANAGEMENT”.

[4]

Select “Format Disc” with [

3, 4] and press

[ENTER].

[5]

Select “Yes” with [

2] and press [ENTER].

[6]

Select “Start” with [

2] and press [ENTER].

≥Formatting starts.
≥A message appears when formatting is finished.
Note
≥Formatting normally takes a few minutes; however it may take

up to a maximum of 70 minutes (

[RAM]).

Do not disconnect the AC mains lead while formatting. This

can render the disc unusable.

[7]

Press [ENTER].

To stop formatting

[RAM]

Press [RETURN].
≥You can cancel formatting if it takes more than 2 minutes. The disc

must be reformatted if you do this.

Note
≥When a disc has been formatted using this unit, it may not be

possible to use it on any other equipment.

≥DVD-R, +R and CD-R/RW cannot be formatted.
≥You can format DVD-RW only as DVD-Video format on this unit.
≥The disc cannot be formatted if the write-protect tab (

l 28) is

switched to “PROTECT”. Release the protection to continue.

≥The message “Unable to format” appears when trying to format

discs the unit cannot use.

[-R] [-RW‹V›] [+R]
≥Follow steps 1 to 3 of “DISC MANAGEMENT”.
Select whether to show the top menu after finalizing the disc. Do this
before finalizing the disc.

[4]

Select “Auto-Play Select” with [

3, 4] and press

[ENTER].

[5]

Use [

3, 4] to select a desired item and press

[ENTER].

≥Top Menu: The top menu appears first.
≥Title 1:

The disc content is played without displaying the
top menu.

[-R] [-RW‹V›] [+R]
≥Follow steps 1 to 3 of “DISC MANAGEMENT”.
≥Make selection from “Auto-Play Select” before finalizing the disc.

(

l below left)

You can play DVD-R, DVD-RW (DVD-Video format) or +R on
compatible DVD players by finalizing it on the unit, effectively making
it into DVD-Video that complies with DVD-Video standards.
The menu you create with the unit can also be used on DVD players.

[4]

Select “Finalize” with [

3, 4] and press

[ENTER].

[5]

Select “Yes” with [

2] and press [ENTER].

[6]

Select “Start” with [

2] and press [ENTER].

≥Finalizing starts.
≥You cannot cancel finalizing.
≥A message appears when finalizing is finished.
Note
≥Finalizing takes up to 15 minutes.
Do not disconnect the AC mains lead while finalizing. This

can render the disc unusable.

[7]

Press [ENTER].

Note
≥You can only finalize DVD-R, DVD-RW (DVD-Video format) or +R

that were recorded on the unit.

≥When finalizing a high-speed recording compatible disc, it may take

longer than displayed on the confirmation screen (approximately
4 times).

≥After finalizing

- The disc becomes play-only and you can no longer record or edit

it.

[-R] [+R]

- You can record and edit the disc after formatting (

l left) although

it becomes play-only after finalizing.

[-RW‹V›]

- Discs finalized on the unit may not be playable on other players

depending on the condition of the recording.

- There is a pause of several seconds between titles during play.
- Titles are divided into about 5-minute chapters

°.

° This time varies greatly depending on the condition and mode

of recording.

1 Format Disc

Formatting erases all contents (including computer data), and
they cannot be restored. Check carefully before proceeding.
The contents are erased when you format a disc even if you have
set protection.

1 Auto-Play Select

Format Disc

Formatting will erase all contents.
This will take approximately 1 minute.
Start formatting ?

Yes

No

e.g., DVD-RAM

Format Disc

All contents will be erased even if protected.
Start formatting ?

Start

Cancel

Auto-Play Select

Top Menu

Title 1

1 Finalize

Finalize

Finalizing is necessary for compatible
playback. It will take approximately

minutes.

Finalize the disc ?

Yes

No

Finalize

Finalize will make this disc playback only.
Start finalizing the disc ?

Start

Cancel

M7620(GN).book 29 ページ 2005年5月25日 水曜日 午後12時2分

Advertising