Panasonic DIGA DMR-ES30V - Manual (Page 53)

Recording
53
VQT0P03
VHS
Re
co
rd
in
g
[1] Press [PROG/CHECK].
[2] Press [ENTER].
[3] Press [ 2, 1] to move and change the items
with [ 3, 4].
≥You may also use the numeric buttons to enter “Name”, “Date”,
“Start”, “Stop”.
≥Name (Programme Position/TV Station Name)
≥Date
You can also make a daily or weekly programme.
≥Start (start time)/Stop (finish time)
The time increases or decreases in 30-minute increments if
you hold the button.
≥ (Recording mode) ( l 51)
SP ,.LP,.EP,.A°
^--------------------------J
° Recording mode Auto Change Function ( l right)
You can also press [REC MODE] to change the recording
mode.
[4] Press [ENTER] when you have finished making
changes.
≥“Invalid entry” is displayed when you enter the wrong item.
Re-enter the item.
≥Repeat steps 2–4 to programme other recordings.
[5] Press [ , TIMER].
≥“ ” lights on the VHS unit’s display.
The timer recording standby mode is activated on VHS.
However, the unit may not be turned off automatically.
≥You can play or record any media on DVD even if the timer
recording standby mode is activated on VHS.
≥Timer recording can be started whether the unit is turned on or off.
[6] Turn the unit off when you do not play or record
on DVD.
≥If the timer recording is started with keeping the unit turned on,
the unit is not turned off automatically even after the timer
recording is completed. You can turn the unit off during timer
recording.
∫ To release the unit from recording standby
Press [ , TIMER].
“ ” goes out.
≥Be sure to press [ , TIMER] before the programme start time to
put the unit on recording standby. Timer recording will work only if
“ ” is displayed.
∫ To cancel recording when recording has already begun
Press [ , TIMER].
≥You can also press and hold [∫] on the VHS main unit for more
than 3 seconds to stop recording.
Note
≥“
” flashes for about 5 seconds when the unit cannot go to timer
recording standby (e.g., video cassette with no accidental erasure
prevention tab or no video casette in the cassette compartment).
≥If the unit is not put in the timer recording standby mode at the
latest 10 minutes before the programmed timer recording starting
time, the “ ” flashes on the unit display. In this case, press
[ , TIMER] to put the unit in the timer recording standby mode.
During a timer recording performed in SP mode, this function
automatically changes the recording mode if the unit determines that
the remaining tape is insufficient to record the entire programme. If
the remaining tape time is still not sufficient even in LP mode, the
programme cannot be recorded to the end.
≥This function cannot change the recording mode to the EP mode
for PAL system.
≥This function may not work correctly when you record programmes
in NTSC system.
≥The tape length must be set correctly. ( l 54)
≥Some tapes may not work correctly.
≥If the recording mode changes during a timer recording, some
picture distortion occurs at the point.
≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Preparation
≥Press [VHS].
[1] Press [PROG/CHECK].
[2] Press [ 3, 4] to select a programme.
[3] Press [ ¢, CANCEL] to delete, or press [ENTER]
to change.
You cannot delete or change programmes that are currently
recording.
[4] If you press [ENTER] in step 3
Use [ 3, 4, 2, 1] to change and press [ENTER].
≥To continue changing programmes steps 2–4.
[5] Press [ , TIMER].
≥“ ” lights on the VHS unit’s display.
The timer recording standby mode is activated on VHS.
However, the unit may not be turned off automatically.
≥You can play or record any media on DVD even if the timer
recording standby mode is activated on VHS.
≥Timer recording can be started whether the unit is turned on or off.
[6] Turn the unit off when you do not play or record
on DVD.
≥If the timer recording is started with keeping the unit turned on,
the unit is not turned off automatically even after the timer
recording is completed. You can turn the unit off during timer
recording.
For your reference
≥Programmes that failed to record are deleted from the timer
recording list at 4 a.m. 2 days later.
∫ Manual programming
Timer recording
- - - - - - - - - / - - - - : - - - - : - - - - - -
- - - - - - - - - . - - - - : - - - - : - - -
- - - - - - - - - . - - - - : - - - - : - - -
01
Name Date Start Stop
1
1/3
20.7 10:00 11:00 SP Highlighted line is ready
for programming.
Timer recording
- - - - - - - - - / - - - - : - - - - : - - - - - -
- - - - - - - - - . - - - - : - - - - : - - -
- - - - - - - - - . - - - - : - - - - : - - SP
Name Date Start Stop
1/3
01 1 20.7 10:00 11:00 SP
Recording mode Auto Change Function
Check, change or delete programmes
Timer recording
/
- - - - - - - - - / - - - - : - - - - : - - -
- - - - - - - - - . - - - - : - - - - : - - -
- - - - - - - - - . - - - - : - - - - : - - -
Name Date Start Stop
1/3
01 1 20.7 10:00 11:00 SP
M7620(GN).book 53 ページ ２００５年５月２５日 水曜日 午後１２時２分