Panasonic DIGA DMR-ES30V - Manual (Page 55)

Convenient functions
55
VQT0P03
VHS
Co
nve
n
ie
nt
fu
nc
tio
n
s
You can delete a cassette contents all at once.
[1] Insert a cassette that you want to delete the
cassette’s contents.
[2] While stopped
Press [FUNCTIONS].
[3] Press [ 3, 4] to select “QUICK ERASE”, and
press [ENTER].
[4] Press [ENTER] for 5 seconds or more to start
the QUICK ERASE function.
≥QUICK ERASE function takes
approximately 30 minutes.
(with E-180 cassette)
∫ To stop in the middle
Press [ ∫, STOP].
The tape is rewound to the beginning, and it is fast-forwarded with
erasing the tape.
When the tape reaches the end, the unit automatically rewinds it to
the beginning.
Note
≥When a video cassette without the accidental erasure prevention
tab is inserted, this function is not activated.
To see these displays, set the “OSD” item in the VHS FUNCTIONS
to “4:3” or “WIDE” (
l 54).
Press [STATUS].
The following screen appears.
Note
≥These displays do not appear during special playback.
≥The on-screen display may be distorted depending on the playback
tape or the input signal.
Press [AUDIO] to select the audio type.
The audio changes as follows:
L R (Stereo)
> L – > – R > – – (Normal audio track)
^---------------------------------------------------------------}
QUICK ERASE
VHS FUNCTIONS
: access ENTER
: return RETURN
: select
Timer recording
QUICK ERASE
Tape length : AUTO ( E - 240)
SQPB : AUTO
OSD : 4 : 3
: cancel STOP
: press for 5 seconds ENTER
Various indications in on-screen display
1 VHS Indication
2 Input channel
3
Audio type
Show the selected audio type
4
Audio indicators
The Left (L) and Right (R) indicators show which sound mode
is selected as follows:
L R (Stereo): Both the L and R indicators appear.
L –: The L indicator appears.
– R: The R indicator appears.
– – (Normal): Neither the L nor R indicator appears.
5 Recording mode
6
Tape running display
Pressing [STATUS] once makes the on-screen display
appears. After that, press the button repeatedly to change
the display as follows:
Current time
>Operation status and Tape counter
^------------ Remaining tape time ,------------}
During Index search: “01” to “20” is displayed. ( l 54)
During Jet Rewind: “ 6 JET REW” is displayed. ( l 49)
≥Press [¢, RESET] to reset the tape counter (elapsed time)
to “0:00.00”.
The tape counter is automatically reset to “0:00.00” when
inserting a video cassette.
≥The remaining time is approximate. It will be incorrect if you
set the wrong tape time in the “Tape length” item in the VHS
FUNCTIONS menu and if the tape is of poor quality.
Changing audio
M1/M2 1 01
VHS
1 3 2
SP L R
5 4
1 0:00.22 6
M7620(GN).book 55 ページ ２００５年５月２５日 水曜日 午後１２時２分