Panasonic DIGA DMR-ES30V - Manual (Page 67)

Reference
67
VQT0P03
VHS DVD
Re
fe
re
nc
e
Set up Page
Disc Page
Recording Page
Frequently asked questions
What equipment is necessary to
play multi channel surround
sound? ≥DVD-Video:
You can play DVD-Video multi channel surround by digitally connecting an amplifier
equipped with a Dolby Digital or DTS decoder.
≥DVD-Audio:
This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound.
15
–
Can the headphones and speakers
be directly connected to the unit? ≥You cannot directly connect to the unit. Connect through the amplifier etc. 15
The TV has both S Video input
terminal and component video
input terminals. Which terminal
should I connect with? ≥Connecting with the component video terminal provides a more vivid picture compared to
connecting with the S Video terminal.
If you have an LCD/plasma television or LCD projector compatible with progressive scan,
connect through the component video terminals for high-quality progressive video.
If you have a CRT television or a multi system television using PAL mode that is
compatible with progressive scan, we cannot recommend progressive output as some
flickering can occur.
15
Is my TV progressive output
compatible? ≥All Panasonic television that have 576 (625)/50i · 50p, 480 (525)/60i · 60p input terminals
are compatible. Consult the manufacturer if you have another brand of television.
–
Can I play DVD-Video, DVD-Audio
and Video CDs bought in another
country? ≥You cannot play DVD-Video if its region number does not include “4” or “ALL”. 7
Can a DVD-Video that does not
have a region number be played? ≥The DVD-Video region number indicates the disc conforms to a standard. You cannot
play discs that do not have a region number.
–
Please tell me about DVD-R, DVD-
RW, +R and +RW compatibility with
the unit. ≥The unit records and plays DVD-R, DVD-RW (DVD-Video format) and +R, and plays
DVD-RW (DVD Video Recording format) and +RW.
≥The unit also records and plays high speed recording compatible DVD-R, DVD-RW, +R
discs.
6, 7
6
Please tell me about CD-R and
CD-RW compatibility with the unit. ≥This unit plays CD-R/CD-RW discs which have been recorded in one of the following
standards: CD-DA, Video CD, MP3 and still pictures (JPEG/TIFF). Close the session or
finalize the disc after recording. This unit can recognize up to 99 folders (groups) and 999
files (tracks) on a disc with MP3 or still pictures (JPEG/TIFF).
≥You cannot write to a CD-R or CD-RW with the unit.
7, 21,
22
7
Can I record from a commercially
purchased video cassette or DVD? ≥Most commercially sold video cassettes and DVD are copy protected; therefore,
recording is usually not possible.
–
Can DVD-R, DVD-RW (DVD-Video
format) and +R recorded on the unit
be played on other equipment? ≥You can play on compatible equipment such as DVD players after finalizing the disc on
this unit. However, depending on the condition of the recording, the quality of the disc and
capabilities of the DVD player, play may not be possible.
29
Can I record digital audio signals
using the unit? ≥You cannot record digital signals. The digital audio terminals on the unit are for output
only.
–
Can a digital audio signal from the
unit be recorded to other
equipment? ≥You can record if using the PCM signal. When recording DVD, change the “Digital Audio
Output” settings to the following from the SETUP menu.
- “PCM Down Conversion”: “On”
- “Dolby Digital”/“DTS”/“MPEG”: “PCM”
However, only
- As long as digital recording from the disc is permitted.
- As long as the recording equipment is compatible with 48 kHz of sampling frequency.
≥You cannot record MP3 signals.
42
–
Can I switch to bilingual broadcast
during recording? ≥With DVD-RAM/cassette tape, you can. Just press [AUDIO].
≥With DVD-R, DVD-RW (DVD-Video format), +R you cannot. Change before recording
with “Bilingual Audio Selection” in the SETUP menu.
–
42
M7620(GN).book 67 ページ ２００５年５月２５日 水曜日 午後１２時２分