Panasonic DIGA DMR-ES30V - Manual (Page 64)

Transferring (Dubbing)
64
VQT0P03
VHS DVD
You can transfer (dub) titles recorded on a disc onto a tape by
specifying the recording parts while watching them.
Preparation
≥ Select the unit viewing channel (e.g. AV input) on the TV.
DVD (Recording source)
≥Insert the disc containing the title to be copied. (
l 8)
VHS (Recording target)
≥Insert a video cassette with an intact accidental erasure prevention
tab. ( l 48)
≥Confirm that the remaining tape time is sufficient for recording.
( l 55)
Settings ( l 42, TV System)
≥When transferring (dubbing) an NTSC disc to a tape
- Set “TV System” on “Connection” in SETUP to “NTSC”.
≥When transferring (dubbing) a PAL disc to a tape
- Set “TV System” on “Connection” in SETUP to “PAL”.
[1] Press [DVD] and press [ 1, PLAY].
≥Start playing the disc and find the start point of the recording.
≥Select the audio to be played (the audio to be recorded)
beforehand. [RAM] [-RW‹VR›]
[2] Press [ ;, PAUSE] at the start point of the
recording.
[3] Press [VHS].
[4] Select “DC” channel with [INPUT SELECT] or
[CH,
W, X].
≥The DVD picture is displayed on the TV.
≥When the TP channel is selected on DVD, you cannot select
the DC channel.
[5] Press [ 1, PLAY].
≥Start playing the video cassette and find the start point of the
recording.
[6] Press [ ;, PAUSE] at the start point of the
recording, then press [ ¥, REC].
≥Put the unit in the recording standby mode.
[7] Press [REC MODE] to select the recording
mode. ( l 51)
[8] Press [ ;, PAUSE].
≥VHS recording and disc play start at the same time.
∫ Manual Transfer (Dubbing) (DVD l VHS)
To pause or stop Manual Transfer (Dubbing)
You cannot stop or pause DVD and VHS at the same time.
∫ To pause or stop recording
Press [VHS] and then press [ ;, PAUSE] or [∫, STOP].
∫ To pause or stop play
Press [DVD] and then press [ ;, PAUSE] or [∫, STOP].
DVD ERASE REC REC MODE
TIME SLIP
STATUS DISPLAY
VHS DVD
CREATE
CHAPTER
JET REW
TIMER
DUBBING
A B C
F Rec
PROG/CHECK
REC REC MODE
SLOW/
SEARCH REW FF
PLAY
DIRECT NAVIGATOR
TOP MENU
SKIP/ INDEX
FUNCTIONS
PLAY
OPERATION
SELECT
CANCEL/RESET
VOLUME CH INPUT SELECT
AUDIO
TV
VHS DVD
TRACKING/V-LOCK
G C d
DVD/ VHS
AV
VHS DVD
INPUT SELECT
VHS DVD
REC MODE
INPUT SELECT
1
;
∫
CH, W, X
µ
∫ About DC channel
(DC: Dubbing input channel)
When the DC channel is selected, it becomes possible for VHS to
receive audio and video signals from DVD. This enables you to
transfer (dub) the video played back on DVD to VHS.
≥The DC channel can be selected by pressing [VHS] and
pressing [INPUT SELECT] or [CH, W, X] several times.
≥When you play back a disc after turning the channel to DC, the
picture on DVD is displayed on the TV screen.
≥Contrary to the DC channel, the TP channel enables DVD to
receive audio and video signals from VHS.
≥When the TP channel is selected on DVD, you cannot select the
DC channel on VHS.
M7620(GN).book 64 ページ ２００５年５月２５日 水曜日 午後１２時２分