Panasonic DIGA DMR-ES30V - Manual (Page 54)

Convenient functions
54
VQT0P03
VHS
Convenient functions
The unit automatically records special index signals on the tape
every time a recording is started. The index search function makes
use of these index signals to let you find the beginning of a desired
programme quickly and easily.
While stopped or during normal play
Press [ :, INDEX] or [9, INDEX].
≥The unit automatically starts playback after the
index signal is found.
≥Each press increases the number of skips.
∫ To cancel the index search
Press [ ∫, STOP].
Note
≥Up to 20 index signals can be searched for in both directions.
≥When you press either one of the buttons too much, you can
control the number of skips by pressing the opposite button.
≥The figure on the display decreases by 1 each time an index signal
is located.
≥This feature may not work correctly if the index signals are too
close together. Make recordings of at least 5 minutes.
[1] While stopped
Press [FUNCTIONS].
[2] Use [ 3, 4] to select a desired item.
[3] Press [ENTER] or [ 2, 1] to change the setting.
∫To exit the settings screen
Press [RETURN].
This description shows the initial settings for the unit. For
details on menu operation (
l above).
≥ Underlined items are the factory default settings.
∫VHS FUNCTIONS
Timer recording
( l 53)
QUICK ERASE ( l 55)
You can delete a cassette contents all at once.
Tape length
Set the length of tape you are using so the unit can show the correct
remaining time.
[AUTO ( 2E-240)] [E-195] [E-260] [E-300]
[AUTO ( 2E-240)]:The VHS automatically distinguishes E30, -60,
-90, -120, -180 and -240 tapes.
[E-195]: For E195 tape
[E-260]: For E260 tape
[E-300]: For E300 tape
SQPB
To play back tapes recorded in the S-VHS format (SQPB; S-VHS
Quasi Playback)
[AUTO] [ON] [OFF]
[AUTO]: This unit automatically detects the format in which
the recording was made and selects the same
format for playback. However, picture distortion may
appear. Therefore, set to [ON] or [OFF].
[ON]: Use this setting when playing back a cassette tape
recorded in the S-VHS format.
[OFF]: Use this setting when playing back a cassette tape
recorded in the VHS format only.
OSD ( l 55)
For automatic display on the TV screen of the TV station information,
type of sound system of the programme being watched and the
sound playback mode.
[4:3] [WIDE] [OFF]
[4:3]: Indications can be displayed on the TV screen.
[WIDE]: Indications can be displayed on the TV screen when
using wide type of TV screen and selecting the wide
screen mode on the TV setting.
[OFF]: No indications appears.
Preparation
≥Press [VHS].
VHS Index Search System (VISS)
∫ Index signals are recorded in the following cases.
≥When a recording is started by pressing [¥, REC].
≥When timer recording is started.
SLOW/
SEARCH REW FF
PLAY
S
OPERATION
SELECT
DVD ERASE REC REC MODE
TIME SLIP
DIRECT NAVIGATOR
TOP MENU
RETURN
CANCEL/RESET
VOLUME CH INPUT SELECT
STATUS DISPLAY
AUDIO
TV
VHS DVD
TRACKING/V-LOCK
SUB MENU
VHS DVD
CREATE
CHAPTER
JET REW
SKIP/ INDEX
TIMER
DUBBING
FUNCTIONS
G-Code
F Rec
DVD/ VHS
PROG/CHECK
AV
INDEX
REC
FUNCTIONS
RETURN
RESET
STATUS
AUDIO
VHS VHS
AUDIO
STATUS
∫
:, 9
µ
3, 4, 2, 1
ENTER
RETURN
FUNCTIONS
Changing the unit’s settings
∫ Common procedures
1 Summary of settings
VHS FUNCTIONS
: access ENTER
: return RETURN
: select
Timer recording
QUICK ERASE
Tape length : AUTO ( E - 240)
SQPB : AUTO
OSD : 4 : 3
M7620(GN).book 54 ページ ２００５年５月２５日 水曜日 午後１２時２分