Placing a video call manually – Polycom ViewStation User Manual
Page 116
Chapter 3
Using the ViewStation
ViewStation User Guide
100
www.polycom.com
•
Placing a Video Call From the Web lnterface, on page 104.
•
Placing a Video Call Using the Address Book, on page 111.
Placing a Video Call Manually
To manually place a video call:
1.
From the Main Calling screen, use the ARROW buttons on the
remote control to select the Video Call icon. Press the SELECT
button on the remote control. The Video Phone screen is
displayed.
Figure 3-4. Video Phone Screen
2.
On the numeric keypad on the remote control, enter the IP
address, the DNS name, and the H.320 phone number or V.35
number for the far site end-point. For example:
•
216.54.148.6 or lobby.austin.polycom.com. (H.323)
•
1 512 555 2593 (H.320)
•
15125551212 (V.35)
Select the desired speed and type of call.
Note
For H.320: If the far site endpoint if it is within the same PBX
system. Enter the last four digits of its number.