Placing telephone calls with the viewstation, Placing a telephone call – Polycom ViewStation User Manual
Page 129
Chapter 3
Using the ViewStation
© Polycom, Inc., 2001
113
ViewStation User Guide
Placing Telephone Calls with the ViewStation
In countries that use the North American POTS standard, connect
an analog telephone line to the back of the ViewStation.
With a POTS line, you can use the ViewStation to:
•
Make an audio telephone call
•
Add a third-party audio call to a video call
•
Add a video call while in an audio telephone call
The following sections describe how to make these calls
Placing a Telephone Call
To place a telephone call using the ViewStation, the ViewStation
must first be connected to a standard POTS or PBX wall jack. See
the ViewStation Quickstart card for more information. To make a call:
1.
From the Main Calling screen, highlight the Telephone icon
and press the SELECT button on the remote control.
The Telephone screen is displayed.
Figure 3-14. Telephone Screen
2.
Using the numeric keypad on the remote control, enter the
phone number of the party to be called. If dialing within a PBX
system, enter the extension number typically used within your
PBX system.