Viewstation h.323 with avaya dcp – Polycom ViewStation User Manual
Page 63
Chapter 2
Optional Configurations
© Polycom, Inc.
47
Not Checked: The E.164 dialing extension is not
displayed when a video call is initiated in H.323 calls.
Multi-Point Setup (MP Enabled ViewStations)
The Multi-Point setup screen determines which mode the
multi-point feature is used. The modes are:
•
Auto: The ViewStation automatically switches between
discussion and presentation mode.
•
Discussion: This mode is also called the continuous
presence. Each site remains on the screen in a tiled
arrangement.
•
Presentation: The main presenter remains on the screen
while each end point switches on and off.
•
Full Screen: Whoever is speaking is viewed in full screen.
When a new endpoint speaks, that endpoint appears full
screen.
ViewStation H.323 with Avaya DCP
The Network Setup screen (System Info > Admin Setup > Video
Network) shown in Figure 2-16 provides four icons which:
•
Configure IMUX properties
•
Configure DCP Video Network properties
•
Set Call Preferences
•
Set Multi-Point Setup preferences (MP systems only).
Figure 2-16. Network Setup Screen (MP Enabled ViewStations Only)