Polycom ViewStation - Manual (Page 161)

Chapter 4 Using the ViewStation with a PC
© Polycom, Inc. 145 ViewStation User Guide
4. Use the ARROW buttons on the remote control to move
backward and forward through a presentation. Use the following
table to navigate the presentation menu for the ViewStation:
Sending Snapshots to the ViewStation
ViewStations with an additional camera(s) can send a snapshot for
any camera connected to the ViewStation by pressing the
SNAPSHOT button on the remote control.
Complete the following to send a snapshot to the ViewStation:
1. Press the SNAPSHOT button on the remote control.
2. Select the desired camera (1, 2, or 3.)
3. Press the SNAPSHOT button again to send the snapshot to the
ViewStation.
4. Press the SNAPSHOT button again to return to live video.
Viewing Snapshots from the ViewStation
Up to 12 users can view ViewStation snapshots by completing the
following steps:
1. Open a web browser.
2. Enter the IP address of the ViewStation in the browser address
bar.
3. Select View a Presentation.
4. Enter the user name (and password if required).
Button Action
UP ARROW Goes to the beginning of the presentation.
DOWN ARROW Goes to the end of the presentation.
LEFT ARROW Moves the highlight marker to the left.
RIGHT ARROW Moves the highlight marker to the right.
MENU Switch between viewing a thumbnail and
viewing the full slide.
SELECT Return to live video or select a slide from
thumbnails.
SLIDES Select another presentation.