Polycom ViewStation - Manual (Page 152)

Chapter 4 Using the ViewStation with a PC
ViewStation User Guide 136 www.polycom.com
d. In the Internet Protocol (TCP/IP) Properties window,
make sure the OBTAIN AN IP ADDRESS
AUTOMATICALLY button is selected. Then click OK.
Note The ViewStation must be powered on when connecting the
PC to the LAN via the ViewStation.
Figure 4-2. Network Screen for Windows 9.X
Connecting The ViewStation to a Stand-Alone PC
Figure 4-1-c illustrates a configuration in which neither the
ViewStation nor the PC has access to an Ethernet LAN. For
example: For an ISDN-configured ViewStation where H.323
videoconferencing is not used.