Polaris ATP 500 4x4 - Manual (Page 79)

76
MAINTENANCE AND LUBRICATION
Periodic Maintenance Schedule
Hours of operation are based on a 10 mph average. If service is due at
20 hours, the equivalent odometer reading would be 200 miles.
Perform all services at whichever reading is reached first.
Item Hours/
Miles
Frequency Remarks
Brake System Pre-Ride Pre-Ride Inspect
Auxiliary Brake Pre-Ride Pre-Ride Inspect
Tires Pre-Ride Pre-Ride Inspect
Wheels Pre-Ride Pre-Ride Inspect
Frame nuts, bolts,
fasteners
Pre-Ride Pre-Ride Inspect
Dump Box Latch Pre-Ride Pre-Ride Inspect; latch securely
"
L
Air filter,
Pre-cleaner
Pre-Ride Pre-Ride Inspect; clean
Coolant level Pre-Ride Pre-Ride Replace coolant every two
years
Fuel and oil tanks Pre-Ride Pre-Ride Fill to proper levels
Throttle Pre-Ride Pre-Ride Check operation
Lights Pre-Ride Pre-Ride Check operation
Engine stop switch Pre-Ride Pre-Ride Check operation
Steering Pre-Ride Pre-Ride Check for free operation
"
Air box sediment
tube
Pre-Ride Pre-Ride Drain deposits whenever
visible
Headlamp Pre-Ride Pre-Ride Check operation daily; ap-
ply Polaris dielectric grease
to connector when replaced
Improperly performing the procedures marked with a
J
could
result in component failure and lead to serious injury or death.
Have an authorized Polaris dealer perform these services.
WARNING