Paxar 9856 - Manual (Page 20)

3-2 Setting Supply Options
To exit an option without changing the setting, press U
R i b b o n
You have to tell the printer if your supplies require a ribbon. To change the
setting, from the Main Menu, select Setup, then Supply. Then, follow these
steps.
1. Press L or R until you see
2. Press E to set the ribbon option. You will see the current setting, for
example:
3. Press L or R to see the other options. After you display the option you
want, press E. Press U twice to exit to the Main menu.
If you set the Ribbon option to Yes, install a ribbon
before printing. Selecting high energy for ribbon does
not affect the printer’s operation.
B a t c h S e p a r a t o r s
A batch separator is an extra label with a
pinstripe pattern. It is printed between
batches to make batches easier to find.
Changing this setting only affects new
formats sent to the printer.
SUPPLY
Ribbon r
RIBBON
l Yes r