Paxar 9856 - Manual (Page 21)

Setting Supply Options 3-3
To change the setting, from the Main Menu, select Setup, then Supply.
Then, follow these steps.
1. Press L or R until you see
2. Press E to set the batch separators option. You will see the current
setting, for example:
3. Press L or R to see the other option. After you display the option you
want, press E. Press U twice to exit to the Main menu.
F e e d M o d e
You can use continuous or on-demand printing. On-demand printing allows
you to remove a label before printing the next one.
To change the setting, from the Main Menu, select Setup, then Supply.
Then, follow these steps.
1. Press L or R until you see
2. Press E to set the supply type option. You will see the current
setting, for example:
SUPPLY
l Separators r
SEPARATORS
Off
r
SUPPLY
l Feed Mode r
SUPPLY TYPE
Continuous
r