Paxar 9856 - Manual (Page 26)

3-8 Setting Supply Options
S p e e d
You can change the print speed for bar codes or graphics. If you select
"Default" for speed, formats with serial bar codes automatically print at 2.0
IPS.
To change the setting, from the Main Menu, select Setup, then Supply.
Then, follow these steps.
1. Press L or R until you see
2. Press E to set the speed option. You will see the current setting, for
example:
3. Press L or R to see the other options. After you display the option you
want, press E. Press U twice to exit to the Main menu.
SUPPLY
l Speed
SPEED
l 6.0 IPS r