Paxar 9856 - Manual (Page 6)

1-2 Getting Started
C o n n e c t i n g t h e P o w e r C a b l e
Connect the AC power cord to the back of the printer and then plug into the
AC wall outlet. Make sure the printer is off before connecting the power
cord.
There may be a delay when the printer is turned off and
then quickly turned back on.
E s t a b l i s h i n g C o m m u n i c a t i o n s
Before the printer can accept print jobs from the host, you must
♦
connect the communication cable to the printer and to the host.
♦
set the communication values on the printer to match those at the
host (only required if you are using the serial port).
AC
Connector
Power Switch