Paxar 9856 - Manual (Page 29)

Communication Values 4-3
S t o p B i t s
To change the setting, from the Main Menu, select Setup, Port Settings,
then User Comm. Then, follow these steps.
1. Press L or R until you see
2. Press E . You will see the current setting, for example:
3. Press L or R to display the number of stop bits you need, press E.
Press U three times to exit to the Main menu.
P a r i t y
To change the setting, from the Main Menu, select Setup, Port Settings,
then User Comm. Then, follow these steps.
1. Press L or R until you see
2. Press E. You will see the current setting, for example:
3. Press L or R to display the parity you need, press E. Press U
three times to exit to the Main menu.
USER COMM
l Stopbits r
STOPBITS
1 r
USER COMM
l Parity r
PARITY
None r