Paxar 9856 - Manual (Page 32)

5-2 Setting Contrast
Correct contrast setting is important because it affects how well your bar
codes scan and how long your printhead lasts. You can use a verifier to
check bar codes for contrast.
1. From the Main Menu, press L or R until you see
2. Press E. Press L or R until you see
3. Press E. You will see the current setting, for example:
4. Press L or R to change the contrast. Pressing L lightens the print; R
darkens the print.
5. Press E to select the displayed value. Press U if you want to exit to
the Main Menu.
MAIN MENU
l Setup r
SETUP
l Contrast r
Enter contrast
[-390/156]: +0