Panasonic KX-FM106 - Manual (Page 25)

25
Setup
Initial Preparation
Date and time, your logo and facsimile
telephone number
!
You should program the date and time, your logo and facsimile telephone number. This information will
be printed on each page transmitted from your unit, fulfilling the requirements of the Telephone Protection Act
of 1991.
Fax Correspondence
Your logo Your facsimile telephone number Date and time
FROM : Panasonic Fax FAX NO. : 1234567 Feb. 26 1999 04:02PM P1
Example:
Setting the date and time
1 Press (MENU) .
Display:
2 Press (#) , then (0) (1) .
3 Press (START/SET/COPY) .
Cursor
4 Enter the correct month/day/year by selecting
2 digits for each using the dial keypad.
Example: Aug. 10, 1999
Press (0)(8) (1)(0) (9)(9) .
5 Press (START/SET/COPY) .
6 Enter the correct hour/minute by selecting 2 digits
for each using the dial keypad.
Press
($) to select “AM” or “PM”.
Example: 3:15PM
1. Press (0)(3) (1)(5) .
2. Press ($) until “PM” is displayed.
TIME: 03:15PM
TIME: 03:15AM
TIME: 12:00AM
M:08/D:10/Y:99
M:01/D:01/Y:99
SET DATE & TIME
1.SYSTEM SET UP
7 Press (START/SET/COPY) .
8 Press (MENU) .
SETUP ITEM [ ]
1 2 3
4 5 6
7 8 9
0
STOP
START/SET/COPY
MENU
JOG DIAL
/
Note:
≥ You can enter the number by rotating
(JOG\DIAL) in steps 4 and 6. In this case,
press to move the cursor.
≥ The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
≥ Press or to move the cursor to the
incorrect number, and make the correction.
≥ If you press (STOP) while programming, the
display will return to the previous one.