Panasonic KX-FM106 - Manual (Page 80)

80
Receiving Faxes
Pager call - when your unit receives a fax !
This feature allows your unit to call your pager when your unit receives a fax document.
1 Press (MENU) .
Display:
2 Press (#) , then (7) (0) .
3 Press (START/SET/COPY) .
4 Press or to select “ON”.
≥ If this feature is not required, select “OFF”.
5 Press (START/SET/COPY) .
6 Enter your pager number.
≥ You can enter a total of 46 digits and/or pauses.
Example:
1 202 555 1234PPP12345678PPP5555#
Your pager
number
Pauses
Your pager access
code, if required.
Message you want displayed
on your pager when your
unit receives a fax.
NO.=
MODE=ON ▼▲
MODE=OFF ▼▲
FAX PAGER CALL
1.SYSTEM SET UP
How your unit and pager work
When your unit receives
a fax document, it will call
your pager company. Your pager
company will
call your pager.
Pager
company
Pager
5 5 5 5
A few minutes later, your pager will display the same
message you entered in step 6 above.
(For example: 5555)
If you have subscribed to a Caller IDservice and the
Caller ID information (telephone number) is received,
your pager will display the telephone number.
1 7 Press (START/SET/COPY) .
≥ The unit will dial the stored number.
1 8 Confirm if the message is displayed on
your pager.
1 9 Press (MONITOR) .
10 If the AUTO ANSWER light is off, turn it on
by pressing
(AUTO\ANSWER) .
PAGER TEST
1 2 3
4 5 6
7 8 9
0
START/SET/COPY
MENU
REDIAL/PAUSE
(Pause)
MONITOR
/
ON
AUTO ANSWER
FAX ON