Panasonic KX-FM106 - Manual (Page 44)

44
Caller ID
Storing your area code ¡
When this feature is set, the caller’s telephone number will be displayed without the area code when a call is
received from the same area. If the call is received from outside your area, the telephone number will be
displayed with “1” at the beginning.
1 Press (MENU) three times.
Display:
2 Press (START/SET/COPY) .
3 Press or until the following message is
displayed.
4 Press (START/SET/COPY) .
5 Enter your area code using 3 digits on the dial
keypad.
6 Press (START/SET/COPY) .
7 Press (STOP) to exit the program.
REGISTERED
CODE=
AREA CODE
PRESS[ ▼▲ ]&[SET]
3.CALLER SET UP
1 2 3
4 5 6
7 8 9
0
/
START/SET/COPY
MENU
STOP
To erase the area code
≥ Press (STOP) when your area code is displayed in
step 4. Press (START/SET/COPY) .
Press (STOP) to exit the program.