Panasonic KX-FM106 - Manual (Page 84)

84
Setup (PC)
Connecting to a computer !
≥ To run the Multi-Function Center software, you need the following software and hardware.
≥ IBM PC 386, or higher, or compatible meeting all AT bus specifications (DX 33Mhz minimum recommended)
≥ Microsoft Windows 3.1/3.11 or Windows 95
≥ Hard Disk drive with at least fourteen (14) MB of available storage
≥ RS232C Serial Port
Note:
≥ The unit cannot print on envelopes.
∫ If your PC has a 9 pin com port:
∫ If your PC has a 25 pin com port:
*To order a KX-FA180, call toll-free 1-800-332-5368.
The RS232C (DB9 Female/DB25 Male) serial cable can also be purchased at a computer supply store.
9 Pin Female
To COM port
25 Pin Male
KX-FA180 or a RS232C cable
(not included)
9 Pin Female
To COM port
25 Pin Male
KX-FA180 or a RS232C cable
(not included)
25 Pin Adaptor