Panasonic KX-FM106 - Manual (Page 69)

69
Fax/Copy
Receiving Faxes
1 Press (MENU) .
Display:
2 Press (#) , then (1) (2) .
3 Press (START/SET/COPY) .
4 Press or to select “ON”.
5 Press (START/SET/COPY) .
≥ The display will show the pre-selected ID.
6 Enter your ID number.
≥ This ID can be from 1 to 5 digits in length using
0–9,
£ and #.
7 Press (START/SET/COPY) .
8 Press (MENU) .
SETUP ITEM [ ]
ID=11
MODE=ON ▼▲
MODE=OFF ▼▲
REMOTE TAM ACT.
1.SYSTEM SET UP
1 2 3
4 5 6
7 8 9
0
/
START/SET/COPY
MENU
Remote operation of your answering machine (remote
activation ID)
Some answering machines will allow you to retrieve voice messages from a remote location. To deactivate the
fax machine while you are checking your messages, set the remote activation ID code for the answering
machine.
Important:
≥ This ID must be different from the fax activation code (p. 76) and the auto disconnection code (p. 79).
The caller can leave a voice message and send a fax document during the same call.
Inform the caller of the following procedures beforehand.
1. The caller calls your fax machine.
≥ The answering machine will answer the call.
2. The caller can leave their message after the greeting message.
3. The caller presses
($) (9) (pre-selected fax activation code).
≥ The fax machine will activate the fax function.
4. The caller presses their start button to send a document.
Note:
≥ The fax activation code can be changed (p. 76).
≥ If the wrong fax activation code is entered, the caller must wait at least 5 seconds to reenter the correct
code.
Receiving a voice message and fax document in one call