Paxar Monarch 9433 - Manual (Page 35)

Setting Up the Printer 3-5
L C D C o n t r a s t
Use this menu to adjust the LCD (display) contrast depending on your
viewing angle. The range is between 0 to 100. The default is 50.
Setup Menu
To exit, press F at any time.
1. From the Setup menu, select LCD Contrast.
Use keys to
Adjust Contrast
↵ - d
2. Press A under - to decrease the contrast or press A under + to
increase the contrast. The contrast changes in 5-step increments
(35, 40, 45, 50, etc.).
3. When the contrast you want is displayed, press A under ↵ to save
the setting. You return to the Setup menu.
Diagnostics Online Diag. Setup Service File System Exit
Stock Energy Backlight LCD Contrast Printer Serial Comm. RF Network Bluetooth Exit Power Mgmt.